Coloplast SenSura Click EasiClose WIDE Two-Piece Maxi Transparent Drainable Pouch

What to buy with SenSura Click 2-Piece Ostomy System

• Coloplast Sensura Click Two-Piece Flat Standard Cut-To-Fit Skin Barrier With Belt Tabs
• Coloplast Alpine Fresh Appliance Cleaner
• Coloplast Brava Ostomy Care Skin Barrier Spray

How to use SenSura Click EasiClose 2-Piece Maxi Drainable Ostomy Pouch?

1. Cutting the base plate - The base plate has a 10 mm starter hole. Trace the size and shape of the stoma on the stoma guide. Cut the hole to fit the size and shape of the stoma. Cutting is easier with a curved pair of scissors. Ensure skin is clean and dry before proceeding with the application of the base plate.
   Caution - To reduce the risk of leakage and skin problems it is very important that the hole in the adhesive fits perfectly around the stoma.
2. Removal of protective film - Place a thumb on the white tab of the adhesive. Pull the blue release tab away from the adhesive to remove the protective film.
3. Application of base plate - Apply the base plate around the stoma. To ensure a perfect fit around the stoma, press firmly against the skin starting at the bottom moving upwards.
4. Application of pouch - Ensure the lockring is open. Press the pouch and base plate together starting at the bottom. Make sure the pouch is securely positioned on the coupling. The pouch may be turned to the optimal position.
5. Locking the coupling - Close the lockring. When you hear a click the pouch is securely locked to the base plate.
6. Removal of pouch and base plate -
   • The pouch: Open the lockring by pressing the small tab with a fingertip. Hold on to the top of the pouch. Remove the pouch from the base plate by pulling the pouch away.
   • The base plate: Grab the white removal ear and pull downwards slowly

How to use SenSura Click Ostomy Pouch with EasiClose Wide Outlet?

7. Close the outlet before use Place the pouch on a table or a flat surface so the coupling faces downwards. Fold the bottom part upwards and close the outlet just like an envelope.
8. Fold the outlet twice – until you see the velour plate.
9. Seal the outlet by folding the hook (Velcro) ears onto the velour plate and press firmly. For cosmetic closing of the outlet see point 15
10. Opening of pouch Lift both hook (Velcro) ears off the velour plate. Unfold the outlet in desired position for emptying the pouch.
11. Emptying of pouch Allow the contents to run out while controlling the emptying with fingers.
12. Cleaning of the outlet Use a tissue or dry wipe and fold it around the outlet tip. Clean the outlet in one sliding movement away from the body.
13. Fold the small plate backwards so only the large plate is visible. Clean the edge. The outlet is now clean and ready to be closed again.
14. Re-closing of the outlet Bend the lowest small plate up and over the large plate. Fold the outlet over the upper large plate at full width. Roll the outlet by folding a total of 3 times. Seal the outlet by folding the hook (velcro) ears onto the velour plate and press firmly.
15. Cosmetic closing of the outlet The whole closing system can be folded up under the soft fronting and attached to the velcro dot. The pouch will become more discreet.

Customer Reviews