Hollister New Image Two-Piece Beige Closed-End Pouch With Integrated Filter

What to buy with Hollister New Image Two-Piece Beige Closed-End Pouch

• Hollister M9 Ostomy Odor Eliminator Spray
• Hollister Karaya Ostomy Paste
• Hollister Adapt Universal Remover Wipes

How to use Hollister New Image Two-Piece Pouch?

1. Measure the stoma using a stoma measuring guide before every barrier application. Trace the determined barrier size opening onto the skin barrier. The skin barrier should fit where the skin and stoma meet. Verify that no skin is showing between the skin barrier and the stoma to help prevent leakage and skin irritation.
2. Using small curved scissors, carefully cut an opening in the skin barrier to match the pattern. Do not cut beyond the line on the release liner.
3. Remove the release liner from the skin barrier. Set aside with adhesive facing up. Close bottom of pouch. If using a drainable pouch, close the Lock ’n Roll micro seal closure at the bottom of the pouch or apply a pouch clamp. Refer to the Lock ’n Roll Microseal Closure Care Tip for more information on using this closure system. Carefully lift an edge of the adhesive and peel downward, gently pushing the skin away from the skin barrier. Properly dispose of the used pouch and skin barrier. Do not flush down the toilet.
4. Clean the skin with water or gentle soap as your healthcare professional recommends. Rinse and dry thoroughly. Do not use oils, powder, lotion, or lotion-type soaps on the skin.
5. Center the skin barrier opening over the stoma in a diamond shape. Remove the backing paper on both sides for tape bordered barriers and press adhesive against the skin.
6. Apply gentle pressure to the skin barrier for about a minute for the best adhesion.
7. Attach the pouch to the skin barrier by engaging the lower edges of the pouch flange and the skin barrier flange. Press the two flanges together. A series of “clicks” will confirm you are doing it correctly. No more “clicks” means the pouch is secured.

Customer Reviews